Sida 2 av 3

Re: I am about to buy a Kalmar Tjorven

Postat: 26 jan 2019 09:38
av Riesjart
Hi there,

After a period of hardly any progress we are now at the point where we can start rebuilding.

There is a challenge that we need to solve though.
The spring caps of the rear suspension are in real bad shape.

We have removed them from the chassis and after some discussion with the daf-club we found out that they are adjusted daf-44 spring caps welded to the chassis.
Unfortenatedly they don't have replacement parts for it.

Has someone had any experience with this? and how did you solve it?

Thanks for your help!

Re: I am about to buy a Kalmar Tjorven

Postat: 26 jan 2019 16:35
av HKC616
Sadly the DAF-parts of Tjorven chassi usually go bad first, front axle and rear upper spring caps.

I ”built” my own of 3mm sheet metal like in the pictures below.
CAFF908E-1A66-40D7-BE1B-6342877B3F7D.jpeg
A51572B4-65CC-4C06-B2FC-9477694182D3.jpeg
/Fredrik

Re: I am about to buy a Kalmar Tjorven

Postat: 26 jan 2019 20:11
av Riesjart
That's too bad, thanks for the info

Where did you buy the 'bucket-shape' from?
Or is that a part that is actually available? the rear suspension is missing from the parts book I have.

Regards

Richard

Re: I am about to buy a Kalmar Tjorven

Postat: 26 jan 2019 20:27
av Riesjart
One more question, I was scrolling trough some other projects on this forum, always good for inspiration!

And i saw in this post
http://www.tjorvenforum.se/viewtopic.ph ... 4&start=40

I was surprised to see a tow bar on this Kalmar. Is this a standard part, or is this a home made solution?
If it is a standard part, is there some one who has one available?

Regards

Richard

Re: I am about to buy a Kalmar Tjorven

Postat: 27 jan 2019 12:08
av HKC616
I dont remember where i bought the bucket.

I have seen tow bars in different forms but i dont know if they are home made or factory. Its a very unusual option so i think it will be hard to find one. Tjorven is only allowed to tow 300kg.

/Fredrik

Re: I am about to buy a Kalmar Tjorven

Postat: 31 jan 2019 09:41
av koerts
this is what daf used the spring plate of the 44 and 55
and cut off half of that
that's how I did mine

Re: I am about to buy a Kalmar Tjorven

Postat: 08 feb 2019 11:41
av HKC616
koerts skrev: 31 jan 2019 09:41 this is what daf used the spring plate of the 44 and 55
and cut off half of that
that's how I did mine
Nice! I havent attached mine to the frame yet, have you?

/Fredrik

Re: I am about to buy a Kalmar Tjorven

Postat: 09 feb 2019 15:23
av koerts
yes but the phone were i took te pictures with is broken so have no pictures of it

Re: I am about to buy a Kalmar Tjorven

Postat: 11 feb 2019 18:47
av koerts
i got the phone back on track

Re: I am about to buy a Kalmar Tjorven

Postat: 04 apr 2019 10:43
av Riesjart
Looks good!

We also came to the conclusion that it were the caps of a Daf44 cut in half.
Unfortunately we could not find original replacement parts...

We now made them from springcaps that had roughly the right shape and adapted them.

Will post some pictures later. Our frame is now sandblasted and the new caps are welded on, so the frame is ready for 'schoperen' and paintjob.

Regards

Richard